BCRLF - INTERLUX BRUSH-EASE,433
- MSDS: BCRLF
- Manufacturer: INTERNATIONAL PAINT COMPANY INC
- Product Name: INTERLUX BRUSH-EASE,433
- National Stock Number: 8010-00N008993
Product Identification
Product ID:INTERLUX BRUSH-EASE,433
MSDS Date:07/02/1986
FSC:8010
NIIN:00N008993
MSDS Number: BCRLF
Responsible Party
UNION, NJ 07083
US
Emergency Phone: 201-686-1300
Info Phone: 201-686-1300
Cage: 26351
Contractor
Telephone: 800-589-1267/800-854-6813
Cage: 26351
Ingredients
AROMATIC SOLVENT NAPHTHA (PETROLEUM),LIGHT.VAPOR PRESSURE 3
CAS: 64742-95-6
Fraction By Weight: 95-100%
OSHA PEL 100 PPM (MFR)
ACGIH TLV: 100 PPM (MFR)
Hazards
LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CHRONIC:OVEREXPOSURE TO,AND MISUSE
OF,SOLVENTS HAS BEEN LINKED TO PERMANENT BRAIN AND NERVOUS SYSTEM
DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:IRRITATION WITH REDNESS,TEARING AND
BLURRED VISION.SKIN:IRRITATION;POSSIBLE DERMATITIS.INHALATION:MAY
CAUSE IRRITATION.INGESTION:MAY CAUSE GASTROINTESTINAL IRRITATION.
Medical Cond Aggravated by Exposure:N/K
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR.GIVE ARTIFICIAL RESPIRATION IF
NEEDED.GET MEDICAL ATTENTION.SKIN:REMOVE CONTAMINATED CLOTHING.WASH
SKIN WITH PLENTY OF SOAP AND WATER.LAUNDER CLOTHES BEFORE
REUSE.EYES:FLUSH IMMEDIATELY WITH LARGE QUANTITIES OF WATER FOR AT
LEAST 15 MINUTES.GET MEDICAL ATTENTION IMMEDIATELY.INGEST:CALL A
PHYSICIAN IMMEDIATELY TO DETERMINE WHETHER OR NOT TO INDUCE
VOMITING.
Fire Fighting
Flash Point:115F,46C
Lower Limits:1% BY VOLUME
Upper Limits:N/K
Extinguishing Media:FOAM,CARBON DIOXIDE,DRY CHEMICAL.DO NOT USE WATER
AS EXTINGUISHING MEDIA.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .USE WATER TO COOL UNOPENED CNTNRS.TAKE CARE TO PREVENT
SPREAD OF BURNING LIQUID WITH WATER.
Unusual Fire/Explosion Hazard:HAZ DECOMP PROD:CO,CO*2,HYDROCARBON
FRAGMENTS.CONTAINS FLAMM SOLVENT:DO NOT USE NEAR SPARK OR OPEN
FLAME.CLSD CNTNRS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION.AVOID PROLONGED
INHALATION OF VAPORS.VENTILATE AREA.CLEAN UP WITH ABSORBENT
MATERIALS.
Neutralizing Agent:N/K
Handling
Handling and Storage Precautions:STORE AWAY FROM DIRECT HEAT,FLAME OR
SPARK.AVOID BRTHING DUST/CHIPS FROM SANDING OR BLASTING SURFACES
COATED W/ PROD.STORE IN BUILDING (SEE SUPP DATA)
Other Precautions:N/K
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW TLV
Protective Gloves:RECOMMENDED.
Eye Protection:CHEM WORK GOGG,FACESHLD OPTIONAL
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:N/K
Supplemental Safety and Health
WT/GAL 7.3.HANDLING/STORAGE PRECAUTIONS:IAW REGULATIONS FOR OSHA CLASS
II COMBUSTIBLE.
Chemical Properties
Boiling Pt:B.P. Text:308F,153C
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:>AIR
Spec Gravity:0.877
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:N/K
Appearance and Odor:N/K
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:STORE AWAY FROM DIRECT HEAT,FLAME OR
SPARK.
Hazardous Decomposition Products:CARBON MONOXIDE,CARBON DIOXIDE,VARIOUS
HYDROCARBON FRAGMENTS.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .DO NOT INCINERATE UNOPENDED
CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.